Storage Sharing - TP-Link TL-WDR3600 User Manual

Access Time - During this time the wireless stations could accessing the AP.


Note:
The range of bandwidth for Guest Network is calculated according to the setting of Bandwidth
Control on the page "Bandwidth Control->Control Settings".
4.8.2

Storage Sharing

Choose menu "Guest Network → Storage Sharing", you can configure the Guest Network
Storage Sharing on the page as shown in Figure 4-45. When a share folder is added, you can
view its display name, volume partition, folder path and you can delete the share folder by clicking
the Delete button.
User Name - The user name is guest for Guest Network, which can't be changed.

Password - Enter the password in the Password field. The password must be composed of

alphanumeric symbols not exceeding 15 characters in length.
Confirm Password - Re-enter the password here.

Storage Authority - Authority of user: Read Only or Read and Write.

Name - This folder's display name.

Partition - The volume that the folder resides. Volume 1-8 is mapping to USB port 1, Volume

9-16 is mapping to USB port 2.
Folder - The real full path of the specified folder.

You can edit the share folder by clicking Edit.
You can delete the share folder by clicking Delete.
Follow the instructions below to set up your Guest Network Storage Sharing:
1. Plug an external USB hard disk drive or USB flash drive into this Router.
2. Make sure the Service Status on the page "USB Settings -> Storage Sharing" is Started.
TL-WDR3600
Figure 4-45 Guest Network Storage Sharing
- 59 -
N600 Wireless Dual Band Gigabit Router