TP-Link TL-WDR3600 User Manual page 49

Disable Security - If you do not want to use wireless security, check this radio button. But it's

strongly recommended to choose one of the following modes to enable security.
WPA/WPA2-Personal - It's the WPA/WPA2 authentication type based on pre-shared

passphrase. The Router is configured by this security type by default.
• Version - you can choose the version of the WPA-PSK security on the drop-down list. The
default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
• Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
either Automatic, or TKIP or AES as Encryption.

Note:
If you check the
find a notice in red as shown in
TL-WDR3600
Figure 4-20 Wireless Security
WPA/WPA2-Personal
Figure
N600 Wireless Dual Band Gigabit Router
radio button and choose TKIP encryption, you will
4-21.
- 39 -