TP-Link TL-WDR3600 User Manual page 28

Channel - This field determines which operating frequency will be used. It is not

necessary to change the wireless channel unless you notice interference problems with
another nearby access point. If you select "Auto", then the AP will select the best
channel automatically.
Wireless Security

Disable Security - The wireless security function can be enabled or disabled. If

disabled, the wireless stations will be able to connect the Router without
encryption.
Enable Security (WPA-PSK/WPA2-PSK) – It's selected by default, with the

default PSK password the same as the default PIN code.
No Change - If you chose this option, wireless security configuration will not

change!
These settings are only for basic wireless parameters. For advanced settings, please refer to
4.7 Wireless 5GHz.
8. Then you will see the Finish page.
If you don't make any change on the Wireless page, you will see the Finish page as

shown in Figure 3-14. Click the Finish button to finish the Quick Setup.
If there is anything changed on the Wireless page, you will see the Finish page as

shown in Figure 3-15. Click the Reboot button to make your wireless configuration take
effect and finish the Quick Setup.
TL-WDR3600 N600 Wireless Dual Band Gigabit Router
Figure 3-14 Quick Setup - Finish
Figure 3-15 Quick Setup – Finish
- 18 -