Static Routing List - TP-Link TL-WDR3600 User Manual

4.16.1 Static Routing List

Choose menu "Advanced Routing → Static Routing List", and then you can configure the
static route in the next screen (shown in Figure 4-96). A static route is a pre-determined path that
network information must travel to reach a specific host or network.
To add static routing entries:
1. Click Add New... shown in Figure 4-96, you will see the following screen.
2. Enter the following data:
Destination Network - The Destination Network is the address of the network or host that

you want to assign to a static route.
Subnet Mask - The Subnet Mask determines which portion of an IP Address is the

network portion, and which portion is the host portion.
Default Gateway - This is the IP Address of the gateway device that allows for contact

between the Router and the network or host.
3. Select Enabled or Disabled for this entry on the Status drop-down list.
4. Click the Save button to make the entry take effect.
Other configurations for the entries:
Click the Delete button to delete the entry.
TL-WDR3600
Figure 4-96 Static Routing
Figure 4-97 Add or Modify a Static Route Entry
N600 Wireless Dual Band Gigabit Router
- 98 -