Port Triggering - TP-Link TL-WDR3600 User Manual


Note:
It is possible that you have a computer or server that has more than one type of available service.
If so, select another service, and type the same IP address for that computer or server.
To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click Modify or Delete as desired on the Modify column.
Click the Enable/ Disabled All button to make all entries enabled/ disabled.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and click the Previous button to return to the
previous page.

Note:
If you set the service port of the virtual server as 80, you must set the Web management port on
System Tools → Remote Management page to be any other value except 80 such as 8080.
Otherwise there will be a conflict to disable the virtual server.

4.12.2 Port Triggering

Choose menu "Forwarding→Port Triggering", you can view and add port triggering in the next
screen (shown in Figure 4-68). Some applications require multiple connections, like Internet
games, video conferencing, Internet telephoning and so on. Port Triggering is used for some of
these applications that cannot work with a pure NAT Router.
TL-WDR3600
Figure 4-67 Add or Modify a Virtual Server Entry
N600 Wireless Dual Band Gigabit Router
- 74 -