Table of Contents
Advertisement
2
.
2
.
2
D
H
C
P
M
2
.
2
.
2
D
H
C
P
M
DHCP allows a user to obtain an IP address automatically from a DHCP server on the Internet.
If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP address for
Vigor3300 automatically. It is not necessary for you to assign any setting. (Host Name and
Domain Name are required for some ISPs).
Simply click Next to setup LAN interface.
IP Address
Subnet Mask
Status
Start IP
End IP
Primary DNS
Vigor3300 Series User's Guide
o
d
e
o
d
e
Assign an IP address for the LAN interface.
Assign the subnet mask for the LAN interface.
Click Enable to use DHCP server; click Disable to close
DHCP server; click Relay Agent to activate relay agent
function.
Assign the start IP address of the IP pool that DHCP server can
use for clients in LAN.
Assign the end IP address of the IP pool that DHCP sever can
use for clients in LAN.
Type the IP address for primary DNS.
17
Advertisement
Table of Contents
