Draytek Vigor3300 Series User Manual page 105

Priority
Source IP
Destination IP
Service Type Status
DiffServ CodePoint Status Display the setting for DiffServ CodePoint.
Class
Edit
Delete/Delete All
To edit an incoming class filter, please choose one of the radio buttons under Priority and click
Edit. The following page will be shown automatically.
Vigor3300 Series User's Guide
You are allowed to set ten filters. The priority for the filter of
number 1 is the highest; and the priority for number 10 is the
lowest.
Display the source IP address for the filter.
Display the destination IP address for the filter.
Display the service type that you choose for the filter.
Display the class name that you specified for the
incoming/outgoing class filter.
Click this button to open the edit page for adjusting the settings.
Click this button to delete the selected setting or all settings.
99