Table of Contents
Advertisement
No-Reply Count
Apply
Reset
P
P
T
P
P
P
T
P
The service provider must provide the exact settings for this mode.
User Name
Password
Authentication
Service Name
PPTP Local Address
PPTP Subnet Mask
PPTP Remote Address
Vigor3300 Series User's Guide
w
i
t
h
a
D
S
L
M
o
d
e
w
i
t
h
a
D
S
L
M
o
d
e
Assign detecting times to ensure the connection of the WAN.
After passing the times you set in this field and no reply
received by the router, the connection of WAN interface will be
regarded as breaking down.
Click Apply to go back to the WAN Interface Configuration
page. To apply all settings, click Apply on the WAN Interface
Configuration page and reboot your router.
Click this button to clear all the configurations for this page.
m
S
e
t
u
p
m
S
e
t
u
p
Assign a specific valid user name provided by local ISP.
Assign a valid password provided by local ISP.
Select PAP, CHAP, MS-CHAP or MS-CHAP-V2 protocol for
PPP authentication according to the feature that your ISP
provided for widest compatibility. The default value is PAP.
The password will be encrypted in CHAP but not in PAP.
.
Assign a service name required for some ISP services.
Assign a local IP address.
Assign a subnet mask value of IP address.
Assign a remote IP address of PPTP server.
45
Advertisement
Table of Contents
Need help?
Do you have a question about the Vigor3300 Series and is the answer not in the manual?