Draytek Vigor3300 Series User Manual page 90

G r o u p T a b l e
G r o u p T a b l e
Group Table allows you to set definitions for different groups of the filters that will be applied
for the function of IP filter.
Index
Group Name
Next Group
Comment
Add
Edit
Delete
To add a new group, please click Add on the Group Table page to access into the following
page. In this page, you can type in new group name and decide the next group name. Also, you
can type in your comment for such group. After you click Apply, the new group will be added
and you will see it from the drop down menu of Start Filter Group.
this list must exist and had been pre-configured. The system
provides three types of filter for you to choose in default. The
available settings provided here can be added or edited in
Firewall>>IP Filter>>Group Table.
Allow you to change current IP filter table or add new rule for
current group. Click the number link to get into the IP filter
table page for editing.
Display the group name.
Display next group name.
Display the notice for current group.
Allow you to add a new IP filter table.
Allow you to edit selected IP filter table.
Allow you to delete selected IP filter table configuration. If this
entry is assigned as the started filter group already, it cannot be
deleted.
84
Vigor3300 Series User's Guide