Bandwidth Limit - Draytek Vigor2130 Series User Manual

Start IP
End IP
Sessions Limit
Add
Edit
Delete
When you finish adding a new session limit, simply click OK.
3 . 4 . 2 B a n d w i
3 . 4 . 2 B a n d w i
The downstream or upstream from FTP, HTTP or some P2P applications will occupy large of
bandwidth and affect the applications for other programs. Please use Limit Bandwidth to make
the bandwidth usage more efficient.
In the Bandwidth Management menu, click Bandwidth Limit to open the web page.
To activate the function of limit bandwidth, simply click Enable and set the default or
user-defined upstream and downstream limit.
Disable
Enable
Vigor2130 Series User's Guide
Defines the start LAN IP address for limit session.
Defines the end LAN IP address for limit session.
Defines the available session number for each host in the
specific range of IP addresses. If you do not set the session
number in this field, the system will use the default session limit
for the specific limitation you set for each index.
Adds the specific session limitation onto the list above.
Allows you to edit the settings for the selected limitation.
Remove the selected settings existing on the limitation list.
d t h L i m i t
d t h L i m i t
Click this button to close the function of limit bandwidth.
Click this button to activate the function of limit bandwidth.
57