Draytek Vigor2130 Series User Manual page 85

Key1-Key4
Authentication Mode
WPA-PSK
Accepts only WPA clients and the encryption key should be entered in PSK. The WPA
encrypts each frame transmitted from the radio using the key, which either PSK
(Pre-Shared Key) entered manually in this field below or automatically negotiated via
802.1x authentication.
WPA Mode
WPA Algorithm
WPA Pre-Shared Key
WPA-RADIUS
The built-in RADIUS client feature enables the router to assist the remote dial-in user or
a wireless station and the RADIUS server in performing mutual authentication. It enables
centralized remote access authentication for network management.
Vigor2130 Series User's Guide
Four keys can be entered here, but only one key can be
selected at a time. The format of WEP Key is restricted to
5 ASCII characters or 10 hexadecimal values in 64-bit
encryption level, or restricted to 13 ASCII characters or 26
hexadecimal values in 128-bit encryption level. The
allowed content is the ASCII characters from 33(!) to
126(~) except '#' and ',' .
Choose OPEN or SHARED as the authentication mode.
OPEN: Set wireless to authentication open mode.
SHARED: Set wireless to authentication shared mode.
Select WPA, WPA2 or Auto as the type.
Select TKIP, AES or auto as the algorithm for WPA.
Either 8~63 ASCII characters, such as 012345678..(or 64
Hexadecimal digits leading by 0x, such as
"0x321253abcde...").
77