General Setup - Draytek Vigor2130 Series User Manual

3 . 6 . 2 G e n e r a l
3 . 6 . 2 G e n e r a l
By clicking the General Setup, a new web page will appear so that you could configure the
SSIDs and the wireless channel.
Please refer to the following figure for more information.
Enable Wireless LAN
SSID Broadcast
SSID
Isolate
Wireless Mode
Channel
Vigor2130 Series User's Guide
S e t u p
S e t u p
Check the box to enable the wireless function.
Choose Show to make the SSID being seen by wireless clients.
Choose Hide to prevent from wireless sniffing and make it
harder for unauthorized clients or STAs to join your wireless
LAN.
It means the identification of the wireless LAN. SSID can be
any text numbers or various special characters. The default
SSID is "DrayTek". We suggest you to change it.
Check this box to make the wireless clients (stations) with
the same SSID not accessing for each other.
Choose the wireless mode for this router. At present, only
802.11B/B/N mix is available.
It means the channel of frequency of the wireless LAN. The
default channel is 11. You may switch channel if the selected
channel is under serious interference. If you have no idea of
choosing the frequency, please select Auto to let system
determine for you.
75