1
.
2
.
2
F
o
r
V
i
g
o
r
2
1
1
.
2
.
2
F
o
r
V
i
g
o
r
2
1
3
0
n
3
0
n
LED
ACT
(Activity)
HPA
WAN
LAN
1/2/3/4
USB1/2
VPN
QoS
WLAN
WPS
Button
Interface
WLAN
WAN
LAN
(1/2/3/4)
USB (1/2)
Status
Explanation
Blinking
The router is powered on and running
normally.
Off
The router is powered off.
On
Hardware NAT is enabled.
Off
Hardware NAT is disabled.
On (Orange)
The port is connected with 100Mbps.
On (Green)
The port is connected with 1000Mbps.
Off
The port is disconnected.
Blinking
It will blink while transmitting data.
On (Orange)
The port is connected with 100Mbps.
On (Green)
The port is connected with 1000Mbps.
Off
The port is disconnected.
Blinking
The data is transmitting.
On
A USB device is connected and active.
Blinking
The data is transmitting.
On
The VPN tunnel is active.
On
The QoS function is active.
On
Wireless access point is ready.
Blinking
It will blink while wireless traffic goes
through.
On
Press this button for 2 seconds to wait
for client device making network
connection through WPS. When the
LED lights up, the WPS connection
will be on.
Off
The WPS is off.
Blinking
Waiting for wireless client sending
requests for connection about two
minutes.
Description
Press the button once to enable (WLAN LED on) or
disable (WLAN LED off) wireless connection.
Connector for accessing the Internet.
Connectors for local networked devices.
Connector for USB storage (Pen Driver /Mobile HD) or
printer.
4
Vigor2130 Series User's Guide