Usb Application; Usb General Settings; Ftp User Management - Draytek Vigor2130 Series User Manual

4 . 9 U S B A p p l
4 . 9 U S B A p p l
USB diskette can be regarded as an FTP server. By way of Vigor router, clients on LAN can
access, write and read data stored in USB diskette. After setting the configuration in USB
Application, you can type the IP address of the Vigor router and username/password created
in USB Application>>FTP User Setting on the FTP client software. Thus, the client can use
the FTP site (USB diskette) through Vigor router.
4 . 9 . 1 U S B G e
4 . 9 . 1 U S B G e
This page will determine the number of concurrent FTP connection and default charset for
FTP server. At present, the Vigor router can support USB diskette with versions of FAT16 and
FAT32 only. Therefore, before connecting the USB diskette into the Vigor router, please make
sure the memory format for the USB diskette is FAT16 or FAT32. It is recommended for you
to use FAT32 for viewing the filename completely (FAT16 cannot support long filename).
Enable FTP
Enable Disk Sharing
Workgroup Name
4 . 9 . 2 F T P U s e
4 . 9 . 2 F T P U s e
This page allows you to change user setting for USB storage disk. Before modifying settings
in this page, please insert a USB diskette and configure settings in User>>User
Configuration first. Otherwise, an error message will appear to warn you.
Click the name link under User Name to open the setting web page.
i c a t i o n
i c a t i o n
n e r a l S e t t i n g s
n e r a l S e t t i n g s
Check this box to enable FTP connection.
Check this box to share the information on USB disk.
Type the name for FTP users for accessing into FTP server
(USB diskette). Be aware that users cannot access into USB
diskette in anonymity. Later, you can open FTP client software
and type the username specified here for accessing into USB
storage diskette.
r M a n a g e m e n t
r M a n a g e m e n t
184
Vigor2130 Series User's Guide