Operation - Dimplex DLGM29 Owner's Manual

Operation

Figure 3
The manual controls for the Log
Grate are located in the front right
side. (Figure 3)
A. On/Off Switch
supplies power to the Log Grate.
B. Momentary Button
Pressing this button toggles
between Logs; Logs and Flame
Effect; and off.
Remote Control
The unit is supplied with a radio
frequency remote control. This
remote control has a range of
approximately 50' (15.25m).
It does not have to be pointed
at the fireplace and can pass
through most obstacles (including
walls). It is supplied with one of
B
243 independent frequencies to
prevent interference with other
units. The frequency designation
is indicated on the back of the
remote control.
!
NOTE: Before attempting any
operation with the remote control,
pull the plastic insulator strip out
from between the remote casing
and battery cover (Figure 4).
Remote Control Initialization/
Reprogramming
Follow these steps for remote
control initialization and if
required, re-initialization:
1. unplug power adapter from
unit.
2. Wait a minimum of five (5)
a
15