Table of Contents
Advertisement
SAFETY IN OPERATION
AFTER SALES SERVICE
The heater is operated by simply switching on the electrical supply, or, if
used in conjunction with a control system, then the supplier's instructions
must be observed.
ALWAYS disconnect the heater from the supply before attempting to work
on or near it.
NEVER operate the heater with a high accumulation of dust or dirt on the
lamp(s) or reflector or with a damaged or corroded reflector.
NEVER use the heater where flammable dusts, gases or vapours, etc., are
likely to be present in the atmosphere.
NEVER operate the heater in close proximity to the skin or eyes.
NEVER allow materials which could be damaged or ignited by the radiated
heat to be placed in close proximity to the heater.
NEVER cover the heater – even when it is switched off.
ALWAYS refer to these instructions before attempting to dismantle the
heater.
Your Quartzray Vector Heater is guaranteed from one year from date of
purchase. We undertake to exchange or repair free of charge within this
period, any part found to be defective due to a manufacturing fault.
Should you require after sales service, please get in touch with the supplier
through whom you purchased the appliance.
Please do not initially return a faulty appliance or part of an appliance to us
as this may result in transit damage and/or delay in providing service. Let
us know your difficulty quoting the model number and series letter of the
appliance. We will then take the appropriate action.
Advertisement
Table of Contents
