Programming Holiday Mode - Venstar T2900 Owner's Manual

SECTION 20

Programming Holiday Mode

When the thermostat is programmed for a Holiday mode, it will take
effect at 12:00 am of the next day. In order for the Holiday mode to
take effect the thermostat must be in the Program On mode. The
thermostat will control to the Unoccupied cooling and heating set-
points set in Section 6, pages 6.2 and 6.3.
Holiday setpoints will be enforced for the number of days specified
in step #1 (0 - 99 days).
Press the HOLIDAY button to enter
Press
the Holiday programming setup
HOLIDAY
steps.
Select the number of days
that the Holiday schedule
will be in effect. A value
of 0 disables Holiday
mode.
Press the HOLIDAY button to exit the setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
20
You cannot set the Heat setpoint any higher than the Cool setpoint minus
the deadband setting in Advanced Setup step #22 on page 13.2.
Setup
1
0
dY
Page 20.1
Press
HOLIDAY