Venstar T2900 Owner's Manual page 24

Operating Mode when the Thermostat
is Configured to be:
PROGRAMMABLE WITH Auto-Changeover - If the thermostat is
configured to be a programmable thermostat with Auto-Changeover,
the following screens will be available by pressing the MODE button.
Select the Mode by Pressing the MODE Button
Heating Only
The HEAT setting indicates the
temperature the room has to
reach before the furnace will
turn on to heat the room.
Cooling Only
The COOL setting indicates the
temperature the room has to
reach before the air conditioner
will turn on to cool the room.
Heating or Cooling
AUTO will automatically select
heat or cool based on room
temperature demand.
Time Schedule for
Heating or Cooling
Program On will activate the
time period program for the
heating and cooling
setpoints. (occupied or
unoccupied periods)
Off
OFF indicates both heating
and air conditioning
systems are turned off.
12:00
Pm
Su
70
H
EAT
68
12:00
76
Pm
Su
C
OOL
70
12:00
76
Pm
Su
C
OOL
AUTO
70
H
EAT
68
Program On
12:00
76
Pm
Su
C
OOL
70
H
occupied EAT
68
12:00
Pm
Su
70
OFF
Page 4.7
4
Press
MODE
Press
MODE
Press
MODE
Press
MODE