Accessories - Venstar T2900 Owner's Manual

SECTION 23

Accessories

ACCESSORY PORT - The RJ11 Jack is used to connect the
T2900 to the IR Receiver (ACC0431) for wireless communication
or the EZ Programmer (ACC0432) for easy downloading or
uploading of thermostat information.
The Accessory Port is located on
the bottom of the thermostat.
IR RECEIVER / REMOTE CONTROL
IR Receiver is connected, the thermostat can be controlled using
an IR Remote Control. The thermostat may also interface with
other wireless systems in your home. For more information see the
manual for the IR Receiver (ACC0431).
EZ PROGRAMMER
(optional accessory)
is connected, the thermostat Time Period Programming and
Advanced Setup Programming can be stored into the EZ
Programmer's memory. This information can then be uploaded
to other T2900 thermostats.
manual for the (ACC0432).
COMFORT CALL
(optional accessory)
the thermostat's Heating and cooling functionality may be accessed
and controlled through the phone. For more information see the
manual for Comfort Call (ACC0433).
RJ11 Type Jack
- When the
(optional accessory)
- When the EZ Programmer
For more information see the
- When Comfort call is connected,
Page 23.1
23