Turning On/Off The Backlight; Programming The Thermostat To Display Temperature In Fahrenheit Or Celsius - Venstar T2900 Owner's Manual

Turning On/Off the Backlight

Press the MODE button. While holding
MODE
the MODE, press the PROGRAM
button to enter Setup screens.
PROGRAM
Press the MODE button repeatedly
MODE
until this setup screen appears.
Select backlight operation:
AUTO - Light from 6pm to
6am nightly.
ON - Light continuously.
OFF - Light for 8 seconds
after a button press.
Programming the Thermostat to Display
Temperature in Fahrenheit or Celsius
C
Sel ec t the rmos tat
operation in degrees
Fahrenheit or Celsius.
F
Press the PROGRAM button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
Note: Press the
button momentarily
to move through the
setup screens. Press
and hold the
button to move back-
wards through the
setup screens.
Setup
5
AUTO L1
Setup
6
F
Page 8.2
MODE
MODE
8
Press
MODE
Press
PROGRAM