Using The Fan Button; Smart Fan Operation - Venstar T2900 Owner's Manual

Using the Fan Button

When the fan is set for automatic operation it will energize any time
there is a call for heating or cooling, otherwise the fan will remain off.
Pressing the FAN button will energize the fan and display the FanOn
icon on the thermostat display. To operate the fan in the automatic
mode, press the FAN button again and the FanOn icon will disappear.
Press
FAN
Am
12:00
76
Su
C
OOL
AUTO 70
H
EAT
68
FanOn

Smart Fan Operation

This feature allows the fan to run continuously during Occupied 1, 2
or 3 and automatically de-energize during Unoccupied, except when
necessary to heat or cool. To use this feature, place the thermostat in
the Program On mode. Next, press the FAN button to display the
FanOn icon (see below).
12:00
Su
occupied
1
FanOn
Fan On indicates constant fan operation.
If Fan On is selected the fan will run
continuously at all times, except in Off,
and will only run if there is a heating or
cooling demand in Unoccupied periods.
Pressing the FAN button toggles this
feature on or off.
Am
76
C
OOL
70
H
EAT
68
Page 7.2
7