Venstar T2900 Owner's Manual page 67

Adjusting the Deadband
For more detailed information, please see the explanation on the
previous page.
Press the MODE button. While holding
MODE
the MODE, press the PROGRAM
button to enter Setup screens.
PROGRAM
Press the MODE button repeatedly
MODE
until this setup screen appears.
Adjust the deadband
for the 1st stage.
(1 - 6 )
13
Adjust the deadband
for the 2nd stage.
(0 - 10 )
Adjust the deadband
for the 3rd stage.
(0 - 10 )
Press the PROGRAM button to leave the Setup screens. If no buttons are
pressed, the display will leave the setup screens after 30 seconds.
Note: Press the
button momentarily
to move through the
setup screens. Press
and hold the
button to move back-
wards through the
setup screens.
Setup
d b1
24
2
Setup
d b2
25
2
Setup
d b3
26
2
Page 13.5
MODE
MODE
Press
MODE
Press
MODE
Press
PROGRAM