Toshiba IP EDGE User Manual page 46

IPedge
Feature Operations
Station Call Forward
Categories
Call Forward Settings
42
perform any Call Forward function using Enterprise Manager Personal
Administrator (EMPA) User Administration tool. Call Forward must be set prior
to receiving the call.
Check with your System Administrator to determine if
Important!
the system uses Basic Survivability, if yes, do not
change your station call forward settings.
The following calls to your station can be forwarded:
Internal calls
•
Auto Attendant calls
•
Outside lines that ring only your station
•
Transferred internal or incoming line calls
•
You can set Call Forward for the following categories of calls. Within these
categories, you can use five different types of Call Forward Settings (as
detailed in the next section).
• Call Forward Any Call
incoming line call.
• Call Forward - Incoming Line
Call Forward Any Call - Set for Another Station
•
forwarding of all calls for another telephone within your telephone system.
• Call Forward - Incoming Line Set for Another Station
to set forwarding of incoming line calls for another telephone within your
telephone system.
Notes:
Call Forward Any Call and Call Forward-Incoming line can be set
•
simultaneously on a telephone. This allows incoming line calls to be
forwarded to a different destination than all of the other types of calls.
Call Forward destinations can be set to internal destinations or an
•
outside telephone number.
• Call Forward All Calls
Call Forward Busy/Do Not Disturb
•
your extension is busy or in Do Not Disturb (DND) mode.
In Tone-first systems with multiple lines, Call Forward Busy forwards calls
•
only when all line appearances are in use. In Voice-first systems, Call
Forward Busy forwards all calls any time your telephone is in use.
• Call Forward - No Answer –
number of rings. The preset number of rings can be set on a per user
basis.
• Call Forward Busy/Do Not Disturb/No Answer –
when you are busy, in DND mode or when you don't answer a call within
a preset number of rings.
• Call Forward Cancel
each category of Call Forward has a different code for canceling.
TOSHIBA
– Forwards any call, whether an internal call or
– Forward incoming line calls only.
– Forwards all calls immediately.
– Forwards calls immediately when
Forwards unanswered calls after a preset
– Cancels the set Call Forward feature. Notice that
– Enables you to set
– Enables you
Forwards all calls
IPedge UG 11/11