TAPI Service Provider
IPedge UG
11/11
Enter the Service Provider Name – This must be set to access the TAPI
•
service provider to be used – typically, this would be set to: Net Server.
Setup – Click the Setup button to open a screen to define the TAPI Service
•
Provider as shown on the following page. The I button is a handy status
indicator for reading the version levels and license codes for the system and
is shown in the Tapi SPI Info screen.
•
Login name – Enter your Login name. If a new installation, a client will
automatically be created in Net Server for this name. Many times the
administrator will have defined your client Login name, see your
administrator for the name to use.
•
Password – Enter an optional password for protecting the connection,
when needed.
•
Extension – Enter the extension number of the phone this Call
Manager is monitoring for call information.
•
Hostname – Enter the name of the Server PC where Net Server
resides.
•
Use Remote Access Port – Check this box only when connecting
remotely through the Internet. When connected locally through your
LAN, do not check this box.
TOSHIBA
IPedge
Preferences
119