Fixed Buttons; Flexible Buttons; Liquid Crystal Display - Toshiba IP EDGE User Manual

IPedge
SoftIPT
Table 6: SoftIPT Button Definitions (continued)
Button

Fixed Buttons

Flexible Buttons

Line Buttons
Liquid Crystal
Display
LCD Control Buttons
30
Audio Settings – Click this button to adjust the audio properties when
connected to a USB handset.
Help – Clicking this icon enables you to access Help as a user or find
information on Setting Audio Properties, etc. Click Help to view all
SoftIPT information.
Shift Button (Purple) – Press Shift at any time to alternate between
display of feature keys 1~10 and feature keys 11~20.
The fixed buttons on your telephone enable you to perform standard functions
quickly and easily. These buttons are described in
All Flexible Buttons must be programmed for your telephone in system
programming and vary for individual telephones. If a button does not appear
on your display or telephone keystrip label, see your System Administrator for
button assignments.
You may have buttons designated as Line and/or Pooled Line Grp which
enable you to directly access outside lines. Pooled Line Grp enables you
to access available CO Lines from a group of lines appearing under one
button.
The Liquid Crystal Display (LCD) on the SoftIPT will display information
similar to the large 9-line IP telephone display:
Desk Clock and Calendar in idle mode
•
Call Duration during an outside call
•
Operational, Advisory, and Notification messages
•
There are two types of LCD button functions: LCD Control Buttons and Soft
Keys.
When the Soft Key prompts appear on the LCD, the LCD Control Button just
below the prompt offers access to that feature.
TOSHIBA
Definitions
Chapter –The Basics.
IPedge UG 11/11