Telephone Terminology - Toshiba IP EDGE User Manual

IPedge
The Basics
Telephone
Terminology
22
6. FB3, LED Off: Normal sensitivity
7. Press Hold to set the option.
8. Go off-hook, then on-hook to exit the program mode.
When making or receiving calls on your IP5000-series telephone you may
experience one or more of the following call features depending on how your
telephone is configured.
Line – is synonymous with trunk which is the line that connects you to the
•
PSTN (Public Switched Telephone Network). Line can be:
• a button on your telephone set designated for outgoing calls
• your DN button followed by dialing 9.
Automatic Line Selection (ALS) – ALS is engaged on outgoing calls.
•
Lift the handset or press Spkr to hear dial tone, the steady green Line
LED indicates ALS in enabled. The second line of the LCD will display the
method of dialing available, followed by the digits dialed.
Ringing Line Preference – Answer any incoming call by lifting the
•
handset or pressing Spkr. There is no need to press the ringing line
button to answer the call when ringing line preference is enabled.
Tone First Signaling – Internal incoming calls only: telephone rings in
•
standard ring tone, lift handset or press Spkr to answer call.
Voice First Signaling – Internal incoming calls only: a long tone is heard,
•
followed by the caller's voice, this will automatically engage the Spkr to
allow for hands free communications. Lift the handset if desired (for
privacy). When Voice First Signaling is enabled the telephone does not
ring on internal incoming calls.
Hot Dialing – Dial a telephone number from the dialpad, the telephone
•
automatically selects a line, shown with a green LED, and turns on the
Spkr and Mic LED's. When Hot Dialing is not turned on the handset
should be lifted or Sprk should be pressed in order to make a call.
TOSHIBA
IPedge UG 11/11