Buttons; Fixed Buttons - Toshiba DK User Manual

The Grand Tour

Buttons

Buttons
There are two sets of buttons, fixed and flexible. The fixed buttons (e.g.,
series telephone (see
(Primary, Secondary, Phantom) and feature buttons. The number of preprogrammed
flexible buttons varies by telephone.

Fixed Buttons

The fixed buttons are located on your dial pad and enable you to perform standard
functions quickly and easily.
Table 1 Fixed Button Definitions
Button
(Conference/
Transfer)
4
, , ,
Table 1). The flexible buttons consist of Directory Number
Press to set up conference and transfer calls (see
45).
Press once to hold internal or outside calls. The Line
LED flashes green at the internal hold rate.
...or press twice to enable Exclusive Hold. The Line
LED flashes green at the exclusive hold rate.
Exclusive Hold enables you to place a call on hold so that only you or somebody
using a Call Pickup code at another station can retrieve it.
To retrieve a call on hold:
Press or [DN] which is on hold
...or if the call is on Exclusive Hold, from another station dial
or dial plus the CO line number (001~200) that the call is held on.
If a call is not retrieved by a certain time (set in
system programming), it recalls back to your phone.
You hear repeated recall tone (or if you are on the
phone, you hear recall tone twice).
L , and M ) are standard to every Strata DK 2000-
Definitions
"Conference Calls" on Page
HOLD LINE 10
JAN 01 SUN 12:19
plus your [DN],
HOLD LINE 201
LINE 10 RECALL
Strata DK Digital Telephone 10/01
, ,