10 - Minidisc Editing; Editing Operations; Tracks And Points For Editing; Canceling Edits - Tascam MD-CD1mkII Owner's Manual

10 – MiniDisc editing
Tracks recorded can be deleted, moved, divided or
combined by MiniDisc editing operation.
In addition, tracks can be grouped.

Editing operations

All MD editing functions are operated from the EDIT sub-
menu on the MD menu.
After selecting a menu option on the EDIT submenu,
subsequent operation will vary. Specific operations
for each menu option are explained individually in the
following section.
NOTE
Editing functions cannot be performed on discs set to
prevent accidental erasure (write protected), and
will be displayed when accessing the EDIT
Protected!
sub-menu of the MD menu.

Tracks and points for editing

For most editing menu options, if the deck is not in play
or in playback standby mode at the track or point to be
edited, the option itself cannot be selected, and
will be displayed. These are options for editing
Edit!
functions to be performed on tracks or points, including
, and
DIVIDE COMBINE MOVE
option is called up before the track has been selected.

Canceling edits

To cancel editing operations up to the point where the
setting screen or confirmation screen (
press the NO button, the MD STOP button, or the MD
MENU button (MENU button on the remote control).
NOTE
After editing operations have been completed, with the
MD still inserted and lit up on the display, if the
TOC
power is turned off, the revised U-TOC will not be written
on the disc, and the editing operation will not be retained
on the disc.
UNDO an edit operation (UNDO
function)
It is possible to cancel the most recently performed
editing operation.
1 Stop the MD deck.
2 Select the option from the EDIT sub-menu.
UNDO?
is displayed, with
Undo> ***
the last performed editing option.
3 Press the MULTI JOG dial (or the YES button) on the
front panel, or the ENT/YES button on the remote
control.
is displayed.
Sure?
40
TASCAM MD-CD1MKIII
W_
Can't
. The
ERASE TRK
) appears,
Sure?
representing
***
4 Press the ENTER button (or the YES button) on the
front panel, or the ENT/YES button on the remote
control.
The last editing operation performed will be undone.

Erase disc (ERASE DISC)

All the tracks on the disc can be erased in one operation.
1 Select the
ERASE DISC?
menu of the MD menu.
is displayed.
Sure?
2 Press the MULTI JOG dial (or the YES button) on the
front panel, or the ENT/YES button on the remote
control.
After all the tracks on the disc are erased,
is shown on the display.

Erase track (ERASE TRK)

Unwanted tracks can be erased one at a time
Example: To erase B in track number 2
Selecting a track to be erased by
playback
1 The deck should be in play or in playback standby
on the track to be erased.
2 Select the
ERASE TRK?
enu of the MD menu.
is displayed.
Sure?
3 Press the MULTI JOG dial (or the YES button) on the
front panel, or the ENT/YES button on the remote
control.
After the track is erased,
display.
Selecting a track to be erased on the
menu
1 In the stop mode, select the
on the EDIT sub-menu of the MD menu.
will be displayed, with
Track>***
the last track number.
2 Select the track to be erased using the MULTI JOG
dial on the front panel, or the MENU –/+ button on
the remote control.
option on the EDIT sub-
Complete
option on the EDIT sub-
is shown on the
Complete
option
ERASE TRK?
representing
***