Table of Contents
Advertisement
Display
,
Q
W
O P A
This display shows various types of operation information,
including CD and MD disc information, deck operation
modes, and menu status. Disc and deck information for
either CD and MD are shown by pressing either the CD
button or the MD button, and the deck selected becomes
the display master. Also, the CD MENU button or the MD
MENU button can be pressed to call up the CD Menu or
the MD Menu.
, TOC
When the most recent TOC (Table of Contents) data
has not been recorded, this lights up red.
. Track number display
During playback or selection, the track number is
displayed.
/ MP3
This indicator is lit when a data CD is in the CD deck.
! MD recording mode display (LP2, LP4, MONO)
This indicates the recording mode of the MD. If the
disc was recorded in Normal mode, it does not light
up.
During MD playback, the recording mode of the MD is
displayed.
@ Counter display
Depending on the time display mode,
is lit. Counter display indication is in minutes
REMAIN
(three digits) and seconds (two digits).
# KEY
This lights when the CD deck's Key Change function is
on.
$ PITCH
This lights when the CD deck's Pitch Control function
is on.
% A. CUE
This lights when the display master deck's Auto Cue
function is on.
^ A. READY
This lights when the display master deck's Auto Ready
function is on.
& A. TRACK
This lights when the display master deck's Auto Track
function is on.
. /
!
@ # $
or
TOTAL
4 – Names and Functions of Parts
%
^
&
*
S
DF
It flashes during recording, in recording standby mode,
or when the Auto Track function is set to
* Meter
This displays the playback level of either the CD or MD
deck, as well as the recording level of the MD deck.
( A-B
This lights when the display master deck's A-B Repeat
function is on.
) REPEAT
This lights when the display master deck's Repeat
function is on.
Q SYNC
This lights during SYNC recording mode.
W REC
This lights when the MD deck is recording, or in
recording standby mode.
E OPTICAL
This lights when the MD input source is set to digital
(OPTICAL).
R COAXIAL
This lights when the MD input source is set to digital
(COAXIAL).
T ANALOG
This lights when the MD input source is set to analog.
Y SINGLE
This lights when the display master deck is in single
playback mode.
U RANDOM
This lights when the display master deck is in random
playback mode.
I PROGRAM
This lights when the display master deck is in program
playback mode.
O Á
This lights when the display master deck is in playback
or recording mode. Also, when the Auto Cue function
is on, it flashes during Auto Cue point search.
(
)
E
R
T
Y
U
I
G
Time
TASCAM MD-CD1MKIII
.
17
Advertisement
Table of Contents
