Changing The Playback Speed Without Changing The Key (Key Original); Program Playback; Editing A Programmed Track; Adding A Track To The Program - Tascam CD-01 U Owner's Manual

7 - Advanced operations
Changing the palyback speed without changing the key (Key Original)
When the Key Original function is ON, you can change
the playback speed without changing the key.
Turn the Key Original function on and off on the menu
(menu number 01 KEY-O). Or pressing the KEY ORIG
key on the remote control turns this function on and off.
Use the PITCH knob on the front panel when SHIFT
indicator is unlit, or use the PITCH and PITCH +/- keys
to change the playback speed without affecting the key.

Program playback

This function enables playback of selected tracks in any
desired order. Up to 100 tracks can be selected from a
CD for Program playbacK.
1 During stop mode, press the PGM key on the remote
control.
Track No.
Or enter the program menu (menu number 4 ProG)
then press the PITCH knob.
2 Use the number keys or SKIP keys on the remote
control, or SKIP keys on the front panel to select
each desired track for program playback.

Editing a programmed track

1 Enter the program mode.
2 Use the SEARCH keys to select the track for editing.
Also using the PITCH knob on the front panel to
select the track for editing.
The track number will be shown in the display.

Adding a track to the program

1 Enter the program mode.
2 Use the SEARCH keys on the front panel or remote
control, or using the PITCH knob on the front panel
to select the programmed track before the portion
you wish to add a track.
The track number should be shown in the display.
3 Pressing the DISPLAY key and SEARCH ˚ key
simultaneously on the front panel or pressing the
A.RDY/INS key adds the program step.
When the Key Original function is ON, you may find that
the audio has artifacts not present when just Pitch is
used. This is an expected result of the Key Original pro-
cessing, it does not indicate a problem with the unit.
3 Press the SEARCH ˚ key. The track number will be
entered into the program.
Or turning the PITCH knob right enters the selected
track number into the program.
4 Repeat the above step 2 and 3 until the desired
program is completed.
Program No.
5 When program is completed, press the PITCH knob
on the front panel or PGM key on the remote control.
Even when the power is turned off, program is main-
tained.
When the disc is ejected, the program lists are erased.
3 Use the number keys or SKIP keys on the remote
control or SKIP keys on the front panel to edit the
programmed track.
4 When editing is completed, press the PITCH knob on
the front panel or PGM key on the remote control.
4 Use the number keys or SKIP keys on the remote
control or SKIP keys on the front panel to input the
track number of the track to be added.
5 Press the PITCH knob on the front panel or PGM key
on the remote control to exit the program mode.
TASCAM CD-01U/CD-01UPro
21