Tascam MD-CD1mkII Owner's Manual page 51

recording time possible in that section is subtracted from
total recording time.
Tracks cannot be combined.
Tracks created through editing operation may not be able
to be combined with other tracks.
If the recording mode (ST, MONO, LP2 or LP4) of two
tracks differs, they cannot be combined.
If three or more tracks are to be combined, tracks less
than a certain length (depending upon recording mode)
cannot be used. The approximate minimum times are
9 seconds for ST mode, 17 seconds for MONO and LP2
mode, and 33 seconds for LP4 mode.
When search operation is performed, the sound
breaks up.
When searching on tracks created through editing
operations, the sound will sometimes break up.
When dubbing from CD to MD, space is created
between tracks.
In order to properly record the cueing positions between
tracks, space of a certain length is created. If such spaces
between tracks are not desired, make the following
settings before dubbing.
Connect the CD digital output to the MD digital input
•
(either the optical or the coaxial terminal)
Select OPTICAL or CIAXIAL as the input source
•
In the REC sub-menu of the MD menu, set the
•
option to
MODE ON
Track numbers are not properly entered.
When recording a CD through a digital connection,
short tracks are sometimes created depending upon the
recorded content of the CD. Also, when the Auto Track
function is used and track numbers are automatically
generated, depending upon the program material, the
track numbers are not properly assigned.
The indication stays on for a longer
TOC Reading
time.
When a new recordable MD disc is used, the
indication is displayed longer than usual.
Reading
For title input, less than 1,700 characters are available.
The title recording area is divided into 7-character units.
Even if a title is created with less than 7 characters, that
amount of space is still taken up. Therefore, in actual use,
you may not be able to input a total of 1,700 characters.
SYNC
TOC
15 – System Limitations
TASCAM MD-CD1MKIII
51