Table of Contents
Advertisement
Turning the Auto Ready function on and off
Press the AUTO READY button on the remote control to
turn the function of display master on and off.
You can also use the
A_READY
sub-menu of the MD menu or CD menu to turn the Auto
Ready function on and off for each deck. (Default position:
OFF)
When the Auto Ready function is on,
the display.
Even when the power is turned off, the Auto Ready setting
is maintained.
Repeat playback
Press the REPEAT button on the remote control to turn
on the Repeat mode. In this mode, all the tracks on the
disc are played continuously. During playback, if the
Repeat mode is turned on, playback continues as before,
and when the last track finishes, playback resumes from
the first track. If Repeat mode is turned on when the deck
is stopped, press the PLAY button to begin operation.
You can also use the
REPEAT?
menu of the MD and CD menus to turn the Repeat mode
on and off for each deck.
Combining the Repeat mode with the Program, Single-
track playback and Random playback functions will
enable Program Repeat, Single-track Repeat and Random
Repeat operations, respectively.
A to B repeat playback
If a specific portion between two points on the disc is
specified, that portion can be played back repeatedly.
1 During playback, press the A-B REPEAT button on
the remote control at the beginning of the desired
portion on the disc.
flashes on the display.
A-
2 At the end of the desired portion on the disc, press
the A-B REPEAT button on the remote control
again.
and
are lit up on the display, and the
REPEAT
A-B
desired A-B section will be played repeatedly.
To cancel A-B Repeat mode and resume normal
playback
Press the A-B REPEAT button once more.
When the STOP button is pressed, the specified A-B
section is cancelled.
NOTE
A-B repeat playback does not function for two different
•
tracks of a CD.
A-B repeat playback does not function for data CDs.
•
? option on the PLAY
is lit on
A.READY
option in the PLAY sub-
7 – CD and MD Playback
Continuous CD and MD playback
With this function, when one deck finishes, the other deck
begins play.
1 Turn on the CONT PLAY switch on the front panel.
2 Play a CD or MD.
When the disc finishes playback, the disc in the other
deck begins playing automatically.
When that disc finishes, the first disc is played again,
and the playback cycle continues.
NOTE
During Continuous Play, the deck currently in playback
•
automatically becomes the display master.
When the Repeat Mode is turned on, Repeat playback
•
is performed instead of continuous playback. That is,
Repeat Mode has priority over the Continuous Play
function.
To cancel Continuous Play operation, press the
STOP button.
Timer Playback
By using an external timer, you can set the MD-CD1MKIII
to play the loaded disc automatically when the unit is
turned on by the timer.
1 First, plug the power cord of the MD-CD1MKIII into
the power outlet of the timer.
2 Load a CD or an MD into the unit.
3 Use the
TIMER PLAY?
menu of the MD or CD menu to turn the timer
function on for the desired deck.
When Timer Play has been turned on, the timer icon
lights up in the display.
4 Set the timer to the desired time. Consult the
timer's operation manual for details.
At the set time, the power to the MD-CD1MKIII will be
turned on, and playback will automatically begin.
NOTE
Only one deck can be selected for timer playback. This
deck will become the display master during Timer Play
operation.
option on the PLAY sub-
29
TASCAM MD-CD1MKIII
Advertisement
Table of Contents
