How To Use The Machine; Safety Recommendations; Why The Safety Devices Cut In - GGP ITALY SPA 122 Owner's Manual

Hide thumbs Also See for 122:
Table of Contents

Advertisement

EN 20
5.

HOW TO USE THE MACHINE

5.1 SAFETY RECOMMENDATIONS

DANGER!
!
which it was designed (cutting and collection of grass).
Do not tamper with or remove the safety devices fitted to the machine.
REMEMBER THAT THE USER IS ALWAYS RESPONSIBLE FOR DAMAGE
AND INJURIES TO OTHERS. Before using the machine:
– read the general safety regulations ( ☛ 1.2), paying particular attention
to driving and cutting on slopes;
– carefully read the instructions for use, become familiar with the controls
and on how to quickly stop the blades and engine;
– never put your hands or feet next to or beneath the rotating parts and
always keep away from the discharge opening.
Do not use the machine when in a precarious state of health or under the
effect of medicines or other substances that can reduce your reflex
actions and your ability to concentrate. It is the user's responsibility to
assess the potential risk of the area where work is to be carried out, as
well as to take all the necessary steps to ensure his own safety and that
of others, particularly on slopes or rough, slippery and unstable ground.
Do not leave the machine stopped on highgrass with the engine running
to avoid the risk of starting a fire.
WARNING!
!
10° (17%) ( ☛ 5.5). If the machine is likely to be used mostly on sloping
ground (never above 10°), fit counterweights (supplied on request ☛ 8.1)
beneath the cross-member of the front wheels which improve stability at
the front and reduce the chance of tipping up.
IMPORTANT
those described in chapter 4.

5.2 WHY THE SAFETY DEVICES CUT IN

The safety devices work in two ways:
– by preventing the engine from starting if all the safety requirements have not
been met;
– stopping the engine if even just one of the safety requirements is lacking.
The machine must only be used for the purpose for
This machine must not be used on slopes greater than
All the references relating to the positions of controls are
HOW TO USE THE MACHINE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

102

Table of Contents