Identification Of The Machine And Parts - GGP ITALY SPA MJ 66 Owner's Manual

2. IDENTIFICATION OF THE MACHINE AND PARTS

2.1 IDENTIFICATION OF THE MACHINE
The identification label located under the seat
has the essential data of each machine.
The serial number (6) must be quoted when you
require technical assistance or spare parts.
1. Acoustic power level according to
directive 2000/14/EC
2. Conformity mark according to
directive 2006/42/CE
3. Year of manufacture
4. Operating engine power and speed
5. Type of machine
6. Serial number
7. Weight in kgs
8. Name and address of Manufacturer
9. Type of transmission (if indicated)
10. Article Code
The example of the declaration of conformity can
be found on the penultimate page of the manual.
2.2 IDENTIFICATION OF MAIN
COMPONENTS
Various main components can be seen on the
machine, and these have the following functions:
11. Cutting deck: this is the guard enclosing the
rotating blade.
12. Blade: this is what cuts the grass. The wings
at the ends help convey the cut grass to-
wards the collector channel.
13. Collector channel: this is the part connect-
ing the cutting deck to the grass-catcher.
14. Grass-catcher: as well as collecting the
grass cuttings, this is also a safety element
in that it stops any objects drawn up by the
blade from being thrown outside of the ma-
chine.
15. Rear discharge guard: this can be fitted
in place of the grass-catcher and prevents
objects drawn up by the blade from being
thrown outside of the machine.
16. Side discharge chute (if provided): it
prevents objects drawn up by the blade from
being thrown away from the machine.
17. Engine: this moves the blade and drives
the wheels. It is fully described in a specific
booklet.
EN 6
Write your machine's serial
18. Battery Electric Start: provides the
energy for starting the engine. It is fully de-
scribed in a specific booklet.
19. Driver seat: this is where the machine op-
erator sits. It has a sensor for detecting the
presence of the operator which is a safety
device.
20. Pictograms for regulations and safety:
give reminders on the main provisions for
working safely, each of which is explained in
chapter 1.
number here (6)