GGP ITALY SPA 122 Owner's Manual page 48

MAINTENANCE
6.4.4 R
EPLACING A FUSE
The machine is fitted with fuses (1) with different capacities and functions.
Specifically:
– 10 A fuse = protects the main and
power circuits of the electronic board.
When it blows, the machine stops and
the dashboard switches off.
– 25 A fuse = protects the battery charg-
er circuit. When it blows, the battery
light comes on to indicate that the bat-
tery is going to run out and the
machine will have problems starting.
The fuse capacity is indicated on the
fuse.
IMPORTANT
type and ampere rating, and never with one of another rating.
If you cannot find out why the fuse has blown, consult a Licensed Service Cen-
tre.
6.4.5 R
EPLACING BELTS
Replacing belts is quite a complicated process of dismantling and subsequent
adjustment and must only be carried out by a Licensed Service Centre.
NOTE
wear! ALWAYS USE GENUINE REPLACEMENT BELTS!
A blown fuse must always be replaced by one of the same
Replace the belts as soon as they show obvious signs of
1
EN 47