GGP ITALY SPA 122 Owner's Manual page 28

HOW TO USE THE MACHINE
WARNING!
!
( ☛ 4.32) to prevent sudden engagement from causing tipping up and
loss of control of the vehicle, particularly on slopes.
5.4.3 B
RAKING
First, reduce the machine's speed by reducing the engine's r.p.m. and then push
the brake pedal (☛ 4.21 or 4.31) to further reduce the speed until the machine
stops.
➤
For hydrostatic drive models:
NOTE
releasing the drive pedal.
5.4.4 R
EVERSE
Reverse must be engaged ONLY when the machine is stopped.
➤
For mechanical drive models:
Push down the pedal until the machine stops and then insert reverse by mov-
ing the lever sideways and putting it into position «R». (☛ 4.22). Gradually
release the pedal to engage the clutch and then begin moving in reverse.
➤
For hydrostatic drive models:
When the machine is stopped, start the reverse movement by pressing the
drive pedal in the «R» direction (☛ 4.32).
5.4.5 G
RASS CUTTING
When you have reached the area to be mowed, make sure that the grass-catch-
er or stone-guard is correctly fitted and that the cutting deck wheels are posi-
tioned at the required height.
Each wheel can be fitted at two different heights: the low position always leaves
a space between the ground and the edge of the cutting deck to prevent the
Drive must be engaged in the way already described
The machine already slows down considerably by just
EN 27