Installation Environment - Speco ONSIP O2D3 Owner's Manual

O N S I P O 2 D 3 O w n e r
O N S I P O 2 D 3 O w n e r

3.5. Installation Environment

ONSIP O2D3 has fan and heater installed inside the product for wide range of environmental temperature.
Refer to the tables below for the temperature range of operation.
Operational temperature range
Operational
Temperature(
Power Supply
Low
Standard PoE -15
DC Jack -20
Starting operation in low temperature
If ONSIP O2D3 is powered up under low temperature environment, the internal heater will warm up the product
until the temperature inside the product reach at proper operational temperature. The table below shows time
required for the heater to warm up the product.
Note that warming up can take a long time under low temperature below zero in Celsius.
Environmental
Power Supply
Temperature
Standard PoE
DC Jack
(12V, x Amp)
Low temperature limit
If environmental temperature drops below certain limit the system will shut down and the heater will warm up
the system for protection of the ONSIP O2D3.
product reaches proper working temperature,
Power Supply
Standard PoE
DC Jack
'
'
s M a n u a l
s M a n u a l
o
C) Humidity
(% Relative Humidity)
High
45 8-80%
45 8-80%
Warming up Time
(Max in minutes)
o
( C)
-10
-15
-10
-15
-20
ONSIP O2D3 will be restarted once the temperature inside the
Environmental
o
Temperature( C)
-25
-25
Operational temperature (Low): Lower limit of
temperature for the equipment to start running.
Operational temperature (High): Upper limit of
the temperature for the image sensor to provide
defect free video.
10
ONSIP O2D3 might not start running under
temperature below -16
20
5
ONSIP O2D3 might not start running under
10
temperature below -21
15
Status of
ONSIP O2D3
Shut Down
System is shut down and the heater is
turned on to warm up ONSIP O2D3.
Shut Down
Misc
Misc
o
C
o
C
Misc
Rev.1.0 (Nov., 2011)
25