Socket Cordless Ring Scanner Series 9 User Manual page 61

4. Tap on the CS HW tab. Enter the following settings:
• Good Read Indicator: Select how you want the Bluetooth CRS to
indicate that it has successfully read data.
• Battery Level: When the Bluetooth CRS is connected, a progress bar
displays this advanced feature.
• Disable Auto Power Off mode:
CAUTION: Selecting this option will disable the Auto Power Off
mode and can result in complete discharge of the CRS battery.
Use with caution.
Bluetooth
Note: When the
Permanent Pair is the only Advanced option for the
5. Tap on the CRS tab. Select the CRS button(s) you want to use to trigger the
scanner. Tap ok.
CHAPTER 5: SETUP FOR NON-SOMO PDAS
CRS is connected, the Advanced button appears.
Bluetooth
CRS.
61