Setup For Non-Somo Pdas - Socket Cordless Ring Scanner Series 9 User Manual

5 | S
This chapter explains how to install and use the Bluetooth Cordless Ring
Scanner (CRS) with a non-SoMo device running Windows Mobile.
Note: Before you begin the instructions in this chapter, please charge and
install the battery, as explained in Chapter 2, "Hardware Preparation."
C O
ONNECTION PTIONS
For Windows-based computers, the Socket Bluetooth CRS offers three
different connection options to fit different work environments.
Scenario
Scenario 1: Single user
with one scanner per
PDA, no roaming.
Scenario 2: Enterprise
deployment with one
scanner per PDA, no
roaming.
Scenario 3: Enterprise
deployment with
scanner(s) roaming
between different PDAs.
IMPORTANT! REMEMBER THE NUMBER OF THE SCENARIO YOU WANT
TO SET UP THE SOFTWARE FOR!
CHAPTER 5: SETUP FOR NON-SOMO PDAS
N
ETUP FOR
How Bluetooth
Connection Initiates
Computer initiates the
connection through
Bluetooth software.
Scanner initiates the
connection automatically
when it is powered on.
(ActivePairing with
Permanent Pair)
Scanner initiates the
connection by reading a
special barcode.
(ActivePairing)
-S M PDA
ON O O
Pros/Cons
Easiest to configure
but requires user to
start connection
through software.
More complex to
configure but
easiest connection
method.
Easy to connect but
requires barcode
generating
software.
S
Compatible
Hardware/
Any version
of Bluetooth
CRS
Wrist Unit
Revision
Letter
8550-00019 F
or later
8550-00028
A or later
49