Snom 200 Administrator's Manual page 78

Description:
the "Xfer" key is pressed on the phone for a consultation transfer. The
phone needs to have 2 active calls in order to use this feature.
key_seq_divert
Valid values:
Default:
Description:
redirection is active with a redirection number.
key_seq_conf_on
Valid values
Default:
Description:
the "Cnf.On" key is pressed on the phone.
key_seq_conf_off
Valid values:
Default:
Description:
the "Cnf.Off" key is pressed on the phone.
5
key_seq_pickup
Valid values:
Default:
Description:
an alerting call. This is activated by pressing the 'pickup' key when the
key_seq_pickup is set.
key_seq_end
Valid values:
Default:
Description:
above key codes before they are sent to the PBX. The end symbol marks
the end of a key code sequence.
78 • Call Register
[ 2 0 0 A
S N O M D M I N I S T R A T O R
Key code that is sent by the phone to the PBX if it is set and
For example <*3>
Blank
Key code that is sent by the phone to the PBX if it is set and
: For example <*3>
Blank
Key code that is sent by the phone to the PBX if it is set and
e.g. <*30>
Blank
Key code that is sent by the phone to the PBX if its set and
e.g. <#11>
Blank
Key code that is sent by the phone to the PBX to pick up
e.g. <#>
Blank
The end symbol that is automatically appended to the
M V 2 . 0 3 ]
A N U A L