Challenge Response On Phone; Call Waiting Indication; Dialtone During Hold; Disconnect On Onhook - Snom 200 Administrator's Manual

Version v2.03
Hide thumbs Also See for 200:
Table of Contents

Advertisement

[
2 0 0 A
S N O M

Deny All Feature

When turned on, this setting shows "Deny All" softkey on
incoming calls to put the incoming numbers in the Deny List. Turning it off
will disable this feature.

Challenge Response on Phone

As explained in an earlier chapter, snom phones can handle
challenge responses on the phone. Turning this setting off will disable this
feature and you will only be able to handle authentication through the
web interface of the phone.

Call Waiting Indication

You can enable or disable the CWI on the phone through this
setting.

Dialtone during Hold

Turning this setting on will produce a dial tone when a call is
being held and the user is trying to dial the second number. Otherwise a
dial tone would not be played.

Disconnect on Onhook

Sometimes it is useful to disable disconnection of a call when the
handset is placed Onhook, e.g. during conference calls or handsfree mode
etc. This can be achieved by turning this setting off.

Administrator Mode

This setting allows you to switch between User & Administrator
modes of the phone.

Administrator Password

In Administrator mode, you can set up the admin password
through this setting. A password can be an alphanumeric string of any
length. You will also have to confirm the password in the following setting
to ensure no typing errors have been made.
M
D M I N I S T R A T O R
V 2 . 0 3 ]
A N U A L
snom technology AG • 91
5

Advertisement

Table of Contents
loading

Table of Contents