Table of Contents
Advertisement
Default: 101
Description: Payload type for Out of band
DTMF.
Base Network Settings
ip_adr
Va
lid values: e.g. <192.168.0.50>
Default: Blank
Description: The IP address of the device.
This parameter is mandatory in order to
e ethernet connection.
enable th
netmask
Valid values: e.g
Default: Blank
Description: The netmask for the device.
This parameter is mandatory in order to
enable the ethernet conn
phone_name
Va
lid values: e.g. <phone1>
Default: Blank
Description: Hostname of the phone.
If this parameter is available, it is
used for identify
signalling.
gateway
Valid
values:
<10.0.0.1>
Default: Blank
Description: The IP address of the default
IP gateway (not the VoIP gateway!!!). It
is the address to which the packets get
routed if the wanted packet address is
not in the current subnet. Setting up this
parameter is mandatory in order to reach
network.
an external
dhcp
V
alid values: <true>, <false>
Default: true
Description: Use DHCP (<true>) or do
Confi guring snom phones for Mass Deployment V3.4
[ F
R E Q U E N T L Y
. <255.255.255.0>
ection.
ing the device in SIP
e.g.
<192.168.0.1>,
A
Q
S K E D
U E S T I O N
not use D
timezone
Valid values: <USA-10>, <USA-9>,
<CAN-8>, <MEX-8>, <USA-8>, <CAN-
7>, <MEX-7>, <USA-7>, <CAN-6>,
<CHL-6>, <MEX-6>, <USA-6>, <BHS-
5>, <CAN-5>, <CUB-5>, <USA-5>,
<CAN-4>, <CHL-4>, <PRY-4>, <BMU-
4>, <FLK-4>, <CAN-3.5>, <GRL-3>,
<PRT-1>, <FRO-0>, <IRL-0>, <PRT-
0>, <ESP-0>, <GBR-0>, <ALB+1>,
<AUT+1>, <BEL+1>, <CAI+1>,
<CHA+1>, <HRV+1>, <CZE+1>,
<DNK+1>, <FRA+1>, <GER+1>,
<HUN+1>, <ITA+1>, <LUX+1>,
<MAK+1>, <NLD+1>, <NAM+1>,
<NOR+1>, <POL+1>, <SVK+1>,
<ESP+1>, <SWE+1>, <CHE+1>,
<GIB+1>, <YUG+1>, <BLR+2>,
<BGR+2>, <CYP+2>, <EGY+2>,
<EST+2>, <FIN+2>, <GAZ+2>,
<GRC+2>, <ISR+2>, <JOR+2>,
<LVA+2>, <LBN+2>, <MDA+2>,
<RUS+2>, <ROU+2>, <SYR+2>,
<TUR+2>, <UKR+2>, <IRQ+3>,
<RUS+3>, <IRN+3.5>, <ARM+4>,
<AZE+4>, <GEO+4>, <KAZ+4>,
<RUS+4>, <KAZ+5>, <KGZ+5>,
<PAK+5>, <RUS+5>, <IND+5.5>,
<KAZ+6>, <RUS+6>, <CHN+7>,
<RUS+7>, <SGP+7>, <KOR+8>,
<JPN+9>, <AUS+9.5>, <AUS+10>,
<RUS+10>, <AUS+10.5>, <NZL+12>,
<RUS+12>, <NZL+12.75>, <TON+13>
Default: Blank
Description: Timezone string, if set, it
sets utc_offset and dst automatically !
utc_offset
V
alid values: e.g. in Germany it is
<+3600>.
Default: Blank
Description:
seconds. Se
dst
Fo
rmat: offset mm.ww.dd hh:mm:ss
mm.ww.dd hh:mm:ss
Valid values: e.g. for Germany <3600
]
HCP (<false>).
Signed
UTC
e timezone also.
offset
in
13
Advertisement
Table of Contents
