Network Base - Snom 100 Administrator's Manual

Out Of Band DTMF
The options for "Out of band DTMF" are
• <on> forces the use of Out of band DTMF,
• <off> turns it off.
• Using the <negotiate> option enables the phone to use Out of
band DTMF if the other party is also supporting it.
• <lowrate_on> enables the phone to use Out of band DTMF for
low rate codecs (G729 and GSM).
Press the menu key in the idle state and select the submenu
"Settings / Codec / DTMF / Out Of Band".
Payload Type
Payload type for Out of band DTMF.
Press the menu key in the idle state and select the submenu
"Settings / Codec / DTMF / Payload Type".

Network Base

MAC Address
This is the identity of the ethernet interface and is unique to each
snom 100. This value cannot be changed.
Press the menu key in the idle state and select the submenu
"Settings / Network / Base / Identity / MAC Adr".
IP Address
Here you can setup the IP address of the phone directly (e.g.
192.168.0.42).
Press the menu key in the idle state and select the submenu
"Settings / Network / Base / Identity / IP Adr".
snom technology AG • 43
4