Snom Mass Deployment V3.4 Frequently Asked Questions Manual page 8

nat_detection
V
alid values: <auto>, <upnp>,
<stunclient>, <static>, <off>
Default: auto
Description: NAT detection according to
work.
your net
stun_server
Valid values: e.g. <217.115.141.99:
5062>
Default: blank
Description: IP address of a STUN server
me:port) if you have one.
(hostna
stun_binding_interval
Valid values: Integer values e.g. 5, 10.
Default: blank
Description: STUN binding interval in
seconds.
rtp_port_start
Valid values: Valid port numbers.
Default: blank
Description: First dynamic RTP port
rtp_port_end
Valid values: Valid port numbers.
Default: blank
iption: Last dynamic RTP port
Descr
network_id_name
Valid values: Valid name.
Default: blank
Description: Network identity
name)
(host
network_id_port
Valid values: Valid port number.
Default: blank
cription: Network identity (port)
Des
8
[ F A
R E Q U E N T L Y
Q
S K E D U E S T I O N
use_nw_port
Valid values: <true>, <false>
Default: false
Description: Use local SIP port (<false>)
work port (<true>)
or net
sip_retry_t1, sip_retry_t2
Valid values: Integer values, e.g.
<500>.
Default: 500, 4000
Description: The time for resending SIP
messages in milliseconds. They should be
to 500 and 4000 respectively.
set
session_timer
Valid values: Integer values, e.g.
<2400>, <3200>.
Default: 3600
Description: Default time for session
timer in seconds. 0 disables the sessio
timer, 3600 is a reasonable value.
dirty_host_ttl
Valid values: Integer values, e.g. <60>,
<120>.
Default: 0
Description: Time in seconds until the
phone waits before it repeats a non
request again.
answered
max_forwards
Valid values: Integer values, e.g. <40>,
<60>.
Default: 70
Description: The maximum number of
hops allowed for an SIP request/
se.
respon
enum_suffix
Valid values: e.g. <e164.arpa>
Default: e164.arpa
Description: Route domain for ENUM,
]
snom technology AG
n