Table of Contents
Advertisement
lcserver1
Valid
values: e.g. <192.168.0.26>
Default: Blank (to use local LCServer on
device)
Description: IP addresses of an alternative
remote LCServer. You will not usually
need to change this setting, its for snom
ternal use only.
in
vlan
Vali
d values: integers separated by a
space, e.g. <128 5>
Default: Blank
Description: VLAN ID (0..4095) and
0..7) separated by a space
Priority (
Update
update_policy
Valid
values: <auto_update>, <ask_
for_update>,
<never_update_boot>, <settings_only>,
<never_update>
Default: settings_only
Description:
behaviour of the phone. <never_update>
does not connect a server regarding
settings or updates at all, <settings_
only> loads settings only from settings
server. <auto_update> does not ask
again, if you are really sure to update.
firmware_interval
Valid valu
es: amount in minutes
Default: 1440 (24*60)
Description: The phone polls by default
each 24 hours for a new firmware. If you
want to change that, it has to be set to
the amount of minutes after a new poll
request should be
setting_server
Valid
values:
/ / w w w . c o m p a n y . c o m / s e t t i n g s /
snom200.htm>, <130.149.12.54>
Confi guring snom phones for Mass Deployment V3.4
[ F
R E Q U E N T L Y
<never_update_firm>,
Determines
the
performed.
e.g.
A
Q
S K E D
U E S T I O N
Default: blank
Description: U
firmware_status
Valid
www.company.com/settings/snom200-
firmware.htm>
Default: Blank
Description: URL of the config file that
consists of the boo
setting, see below.
bootloader, firmware
Valid
/ / w w w . c o m p a n y . c o m / f i l e s /
snom200ABC.bin>, <130.149.12.54>
Default: Blank
Description: URL of the image file for
bootlo
subscribe_config
Valid values: <true>, <false>
Default: false
Description: In case you want to subscribe
to the settings send by the proxy use
update
<true> otherwise (<false>) the settings
e retrieved via setting files.
wer
Miscellaneous
preselection_nr
V
alid values: Integer values & '+' e.g.
<001>, <+491234567>
Default: blank
Description: If a number is entered in
this option, the phone dials this pre-
selected
time the phone is taken off the hook. This
is particularly useful for using calling/
prep
mute
<http:
Valid values: <true>, <false>
Default: false
Description:
]
RL of the settings file.
valu
es:
tloader and firmware
values:
ader or firmware respectively.
number
automatically
aid cards etc.
Mute
e.g.
<http://
e.g.
<http:
every
<true>
the
15
Advertisement
Table of Contents
