Snom 100 v1.9a User Manual page 56

GK/GW Mode
The VoIP phone can be used with a gatekeeper, gate-
way or none. Please ask your system administrator
which value should be set within your network.
Press the menu key in the idle state and select the
submenu "Settings / Network / GK-GW Mode":
Gatekeeper: The phone is in gatekeeper
§
mode. Set the IP address of the gatekeeper in
"Settings / Network / GK-GW Address".
None: The phone is used without a gate-
§
keeper and without a gateway.
Auto: The phone is in gatekeeper mode but it
§
uses a multicast to automatically detect it.
Gateway: The phone is in gateway mode. Set
§
the IP address of the gateway in "Settings /
H.323 / GK-GW Address".
GK/GW Address
Whether the phone is set to gatekeeper or gateway
mode (see "GK-GW Mode") here the IP address is set.
Press the menu key in the idle state and select the
submenu "Settings / H.323 / GK-GW Address".
Fast Start
FastStart sends encoded OpenLogicalChannel messa-
ges in the Setup messages and hence eliminates the
need for an H245 channel i.e. if the other party is also
supporting fastStart. This feature in H323 is optional
so it can be ignored by an endpoint not supporting this
feature. Press the menu key in the idle state and se-
lect the submenu "Settings / H.323 / Fast Start".
On: „Fast Start" is enabled.
§
Off: „Fast Start" is disabled.
§
Early Start
The EarlyStart option allows the H245 channel to be
setup earlier, and hence speeds up the call setup.
When EarlyStart is turned on, the H245 channel ad-
dress is also supplied in the Setup message. This
56