Cb10Xsu.exe - SIIG CyberParallel PCI Installation Manual

CB10xsu.exe

Mode Change
Your CyberParallel PCI supports EPP/ECP, ECP, EPP, and
BPP/SPP modes. The default mode setting is EPP/ECP.
You can change the mode by running cb10xsu.exe.
1. Go to My Computer in Windows 95 and click on the
subdirectory where the DOS utility files are stored. If it is
from the floppy disk, insert Driver Installation diskette and
double-click on "3 1/2 Floppy (A:)"and press <Enter>. Then
double-click on the "DOS" folder and press <Enter>.
2. Double-click on the file cb10xsu.exe and press <Enter>.
The first screen displays the current mode setting, for
example: Parallel 1, EPP(1.9)/ECP.
3. To change the mode setting, type the letter "C" and press
<Enter>.
4. Type in the number corresponding to the mode you want to
change to, such as "4" for BPP/SPP and press <Enter>. The
screen will display the change.
5. Type "Q" and press <Enter> to quit.
6. Restart your system for the change to take effect.
Installation
2-7