Vertical Xcelerator IP Manual

Configuring xcelerator ip with cbeyond’s beyondvoice with sipconnect service

Hide thumbs Also See for Xcelerator IP:

Table of Contents

Download this manual See also: Owner's Manual

Configuring Xcelerator IP with Cbeyond's

BeyondVoice

with SIPconnect service

July 2007

Table of Contents

Need help?

Do you have a question about the Xcelerator IP and is the answer not in the manual?

Page 1 Configuring Xcelerator IP with Cbeyond’s BeyondVoice with SIPconnect service July 2007...
Page 2 This document illustrates the requisite steps to get the Xcelerator IP to register with the BeyondVoice with SIPconnect service. It narrowly focuses on this scope and should be used in conjunction with the general Xcelerator IP configuration and installation documentation.
Page 3 How to configure Xcelerator IP with Cbeyond’s BeyondVoice™ with SIPconnect Service 1. From the main Xcelerator Web page Click on the Voice area to access the Trunk area then click on the IP Trunks to setup the SIP trunks. 2. Fill out the Phone Number and User Name fields with the number that is provided to by Cbeyond.
Page 4 7. The Outbound Proxy and corresponding port can be left blank unless the service activation specialist instructs that they should be filled out and provides the needed values. 8. Only one of your SIP Trunks should register with the Cbeyond SIPconnect service. If this is the first IP Trunk you are setting up, verify that the “Register Status”...