Table of Contents
Advertisement
build RAID in Windows 2000 or Windows XP. To enable the RAID function, the user has
to install a driver program from a floppy disk drive. Please connect the floppy drive to
motherboard before installing the operating system. The user needs to install two Serial
ATA hard drives to build the RAID system.
1.
First start OS installation, and then press <F6> while you are prompted by <Press
F6 if you want to install a third party SCSI or RAID driver...>.
2.
Press <S> when "Windows Setup" is generated. Then insert RAID driver diskette
into floppy drive and press <Enter>.
3.
Select the driver for your OS (Windows 2000 or Windows XP) and press <Enter> to
install the driver.
35
Hide quick links:
Advertisement
Table of Contents
