Record A Par Can Chase - Elation DMX OPERATOR PRO User Manual

Is a 136 channel hybrid lighting control device designed for dj’s, clubs and small touring applications

Hide thumbs Also See for Elation DMX OPERATOR PRO:

Table of Contents

7.6.1 Record a Par Can Scene (Cont.)

(5) Next, use the eight (8) faders, labeled 129-136, to set your desired Par Can scene.

(6) Once your look is set, press the "RECORD" button to SAVE. All LED's will flash once

confirming that your scene has been saved. Your LCD will once again display the

following:

(7) To record additional Scenes, please repeat steps 3 thru 6.

(8) To exit record mode, press the "ESC" button one time.

7.6.2 Record a Par Can Chase

(1) Press and hold down the "RECORD" button for three (3) seconds or until the green

LED next to the RECORD button comes on. The LCD will display the following:

(2) Select the "CHASE" button 1-6, where you wish to record to. The selected Chase

LED will flash repeatedly. For example, if you select CHASE #1, the LED above the

#1 CHASE button will flash repeatedly and your LCD will display the following:

SELECT A SCENE

OR CHASE! PAGE01

SELECT A SCENE

OR CHASE! PAGE01

EDIT CHASE1/TL00

ADD ESC STEP00

DMX OPERATOR PRO

Table of Contents

Show Quick Links

Table of Contents